ferrite magnet block
1.Material: ferrites,strontium,etc.

2.Grade:Y25.Y30,Y35,Y10T,Y30BH,etc
3.Size: 150x100x25mm or  according to client's requirement;

4.Shape: Ring,Block,Disc,Segment,Arc or others.

5.Application:cars, water pumps, disk drivers, starting motors of motor bikes and stepping motors
6.Delivery : depends on magnet specification and quantity.

Attributes of ferrite magnet:

   1. Least expensive material compared to alnico and rare earth magnets
   2. High intrinsic coercive force
   3. Available in simple shapes only due to manufacturing process
   4. Lower service temperature than alnico, greater than rare earth
   5. Finishing requires diamond cutting or grinding wheel
   6. Lower energy product than alnico and rare earth magnets
   7. Most common grades of ceramic are 1, 5 and 8 (1-8 possible)
   8. Grade 8 is the strongest ceramic material available
   9. Tooling can be expensive

Packaging & shipping

Standard Export cartons+Pallets(if the gross weight is more than 800kg),Air packing,sea packing

By Courier(UPS,TNT,FedEx,etc.),By air,By sea,etc.We are experienced on the magnets shipment .

Buyer Guide

In order to quote you the best price quickly, please provide the following information:

1.Product size,grade,etc

2.Order quantity;

3.Attached the drawings if customized

4.Any special packing or other requirements

Our advantage

1. Fast reply: all your enquiry will be replied within 24 hours; 

2. Reasonable price: we are direct manufacturer and able to offer better price; 

3. Good quality: we are experienced in quality control;

4. Fast delivery time:5-30 days

Ferrite magnets have good anti-corrosion performance, no surface treatment needed.

There are two manufacturing process for ferrite magnets: dry process and wet process. By dry process, can produce isotropic & anisotropic magnets; by wet process, only anisotropic magnets can be produced.

Isotropic ferrite magnets are not oriented and can be magnetized in any direction; anisotropic ferrite magnets are different, they are all oriented in the manufacturing direction, and should be magnetized in the direction of orientation.

For dry process, the tool can be changed and developed easily, while for wet process, it is complicated to change the tool and the tooling charge is much higher.

If you interested in any of our products, please feel free to contact me